一、Product introduction： 

Hs-15 JS polymer waterproof coating is a two-component waterproof coating made of acrylic acid as the main raw material with multiple additives and fillersThe product has excellent waterproof properties, high elasticity of organic materials and good durability of inorganic materials，and the color layer can be prepared according to its needs.Widely used in waterproof engineering, it is an ideal new generation of environmental protection waterproof material.

二、Product advantages：

1、Can be applied on dry or moist substrate of various materials.

2、The coating is tough, elastic, strong, waterproof and durable.

3、It does not pollute the environment and is harmless to human beings. It can be used for water proofing in food pools or drinking water projects.

4、The construction is simple, the construction period is short, and the paint can be added to make a decorative color coating.

5、It can be made into ceramic tile adhesive material and sealing material with good performance.

6、  It has excellent uv resistance and good waiting performance, and can be used for outdoor waterproof construction.

三、Scope of  application： 

1、Wet and dry sand and stone, mortar, concrete, metal, wood hard plastic, glass, gypsum board, foam board, asphalt, rubber, SBS, APP, polyurethane and other moisturizing layer, waterproof layer.

2、New and old buildings and structures (e.g. roof, toilet, underground works, tunnels, Bridges, pools, reservoirs, etc.).

3、For bonding and sealing materials, according to liquid: powder = 10:10 ~13 mix putty.

四、The key technical indexes：                    

五、Application method

Prepare the prepared ingredients first,If water is needed, mix the water and liquid mixture first and then slowly add the powder into the liquid.Stir well with an electric agitator until the mixture is smooth and fine without pellets.Stir for about 5 minutes (preferably without stirring by hand) and coat with a roller brush or scraper.The next coating must wait until the previous one is dry and solid.

六、Point of construction：

1、Basal Plane Treatment ：The base surface must be smooth, firm, clean, without clear water, no leakage, uneven and cracks must be leveled first.The leakage should be sealed first, and the Angle of Yin and Yang should be made into an arc Angle.

 2、Ingredient：Ⅰ type according to the fluid material: cement (special powder) = 1:1. The weight ratio of 1,Ⅱ type according to the fluid material: cement (special powder) = 1:1. 5 weight ratio.Slowly add cement (special powder) into the coating,Stir well with an electric agitator until the mixture is smooth and fine without pellets,Stir for about 5 minutes..If the coating is found to be thicker when stirring, a small amount of water can be added to stir it.

3、Construction：The construction of materials is usually carried out two to three times.Apply the mixture evenly to the substrate with a roller brush or brush,the brush should be applied repeatedly in two directions of vertical cross to ensure the penetration and adhesion of the coating on the substrate,The second brush must wait until the previous one is dry.（If the coating is coated with non-woven fabric, its waterproof performance can be improved）.

4、Materials consumption：Thickness of 1mm is about 1.5~2kg/㎡, 1.5mm is about 2~2.5kg/㎡, and 2mm is about 2.5~3kg/㎡.

5、Construotion of insulation protection cover：Before the last waterproof coating is cured,sprinkle it with coarse sand,After the waterproof layer is dry through, a layer of cement mortar protection layer is made to enhance the life of the waterproof layer.

七、Matters needing attention：

 1、Construction temperature is appropriate in 5 ~ 45 °.

2、The waterproof coating shall be protected as necessary before it is dry and fixed,including bans on pedestrian, rain erosion, exposure to the sun, freezing or sharp objects injury;Dry and solid coatings do not require special protective coatings.

3、Product should be sealed storage in 5 ℃ above a cool and dry place, not hermetical product shelf life is one year.

八、Product packaging：

The product packaging is25kg/set、50kg/set。